Conductive PVC Tile

Characteristic

• Superior static control terminates static generation protecting sensitive equipment.
• Lifetime warranty against static generation.
• Perfect for access panel floors as well as direct installations.
• Available in 14 colorways.
• Multiple gauges include 1/8" mm as well as 12" x 12" and 24" x 24" sizes for multiple design requirements.

Conductive & Static-Dissipative Tile

Physical Data

ITEM	Standard test method	ASTM Spec.	Conductive Tile	Static Dissipative tile
Electrical/Electrostatic Properties
Electrical Resistance	ESD S 7.1(100W)
-Surface to Surface	NFPA99(500V)	2.5 x 104~106 (SD : 106~109)	2.5 x 104~106	106~108
	ASTM F 150(500V)
-Surface to Graound	DIN51969(500V)	2.5 x 104~	2.5 x 104~	Less than 20volts
Electrostatic Propensity (=Static Generation)	ESD STM 97.2	-	Less than 20volts	Less than 20volts
Static Decay	Federal Test Method 101B Method 4046 at 15% Relative Humidity	below 0.5 sec	0.01sec	0.01sec
Other Properties
CEN Classification	DIN EN 685		Class 34+43
Composition of Material	ASTM F 1700,. Certificate of Compliance		Homogeneous
Thickness	ASTM F 386 DIN EN428	as specified ± 0.005in. (0.13mm)	1/8" /2mm
Nominal Sizes	ASTM F 536 DIN EN427	0.016 in./lin.Ft (0.4mm/304.8mm)	12x12" / 24x24" / 36x36"
Squareness	ASTM F 540	maximum 0.010 in. (0.25mm)	<0.010"
Residual Indentation	ASTM F1914 DIN EN433	average less than 8% max. single reading 10%	<7%
Flexibility	ASTM F 137	no crack or break	No crack or break
Dimensional Stability	ASTM Fed. Std. No. 501a Method 6211 DIN EN434	<0.020"/ft (0.51mm/304.8mm)	<0.015"/ft
Resistance to chemicals	ASTM F 925 DIN EN423	No more than s slight change in surface dulling, surface attack, or staining
Resistance to Heat	ASTM F 1514	E<8ave, max	<E=2.0
Resistance to Light	ASTM F 1515	E<8ave, max	<E=6.0
Static Load Limit	Modified ASTM F970-00	-	2,500psi
Smoke Density	ASTM E 662	<450	<450
Flame Spread	ASTM E 84, NFPA 225	<75	<75
Fire Resistance	DIN 4102		B1
	ONORM B 3810		B1Q1
Critical Radiant Flux	ASTM E 648, NFPA 253		>1.08W/cm2(Class Interior Floor Finish, NFPA Life Safety Code 101)
Abrasion Resistance	ASTM D 1044, CS-10-F Wheel, 500Gm Weight		Cycle %Gauge Loss 10,000 1.60
Resistance to wear	DIN EN 660-1		M
Effect of Castor Chair	DIN EN 425		No damage
Color Fastness	ISO 105 B02		At least 6
Standard for Health care facilities	NFPA 99		Confirms to the requirement of NFPA 99 in effect at the time of installation
Fulfils product requirements	DIN EN 649		Yes
Underwriters Laboratories	UL 779		Meets UL Standard